Bow Tools: Marlinspike And Sinew Twisters
Item number E7448-0 from the National Museum of Natural History.
Item number E7448-0 from the National Museum of Natural History.
This page shows all the information we have about this item. Both the institution that physically holds this item, and RRN members have contributed the knowledge on this page. You’re looking at the item record provided by the holding institution. If you scroll further down the page, you’ll see the information from RRN members, and can share your own knowledge too.
The RRN processes the information it receives from each institution to make it more readable and easier to search. If you’re doing in-depth research on this item, be sure to take a look at the Data Source tab to see the information exactly as it was provided by the institution.
These records are easy to share because each has a unique web address. You can copy and paste the location from your browser’s address bar into an email, word document, or chat message to share this item with others.
This information was automatically generated from data provided by National Museum of Natural History. It has been standardized to aid in finding and grouping information within the RRN. Accuracy and meaning should be verified from the Data Source tab.
Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/64 , retrieved 1-28-2020: A set of tools for attaching sinew backing to a bow. The set consists of a marlinspike and two sinew twisters made from bone or antler. Each has a drilled hole at one end, and likely at one time had been strung together on a thong. The marlinspike has five small notches cut into the end nearest the drilled hole, and two larger notches cut into the edges near that end. The ends of one of the cable twisters has been made to resemble seal heads. The shapes have been accentuated using shallow drilled holes to indicate nostrils, eyes and ears. More information here: http://www.inuvialuitlivinghistory.ca/item_types/11: Sinew backing was attached to a bow using a marlinspike and a pair of cable twisters. One end of the marlinspike is tapered, and is used to raise strands of sinew when lashing them to the stave, and for tucking in the ends of the lashings. Cable twisters are turned outwards in opposite directions at each end. They are used in pairs for twisting strands of braided sinew into cables that run along the centre part of the bow stave.
This data has been provided to the RRN by the National Museum of Natural History. We've used it to provide the information on the Data tab.
Source of the information below: Inuvialuit Pitqusiit Inuuniarutait: Inuvialuit Living History, The MacFarlane Collection website, by the Inuvialuit Cultural Resource Centre (ICRC), Inuvik, N.W.T., Canada (website credits here http://www.inuvialuitlivinghistory.ca/posts/12 ), entry on this artifact http://www.inuvialuitlivinghistory.ca/items/64 , retrieved 1-28-2020: A set of tools for attaching sinew backing to a bow. The set consists of a marlinspike and two sinew twisters made from bone or antler. Each has a drilled hole at one end, and likely at one time had been strung together on a thong. The marlinspike has five small notches cut into the end nearest the drilled hole, and two larger notches cut into the edges near that end. The ends of one of the cable twisters has been made to resemble seal heads. The shapes have been accentuated using shallow drilled holes to indicate nostrils, eyes and ears. More information here: http://www.inuvialuitlivinghistory.ca/item_types/11: Sinew backing was attached to a bow using a marlinspike and a pair of cable twisters. One end of the marlinspike is tapered, and is used to raise strands of sinew when lashing them to the stave, and for tucking in the ends of the lashings. Cable twisters are turned outwards in opposite directions at each end. They are used in pairs for twisting strands of braided sinew into cables that run along the centre part of the bow stave.
Let the RRN community answer your questions
With an account, you can ask other users a question about this item. Request an Account
Share your knowlege of this item with the RRN community
With an account, you can submit information about this item and have it visible to all users and institutions on the RRN. Request an Account