Tile
Item number 3401/21 from the MOA: University of British Columbia.
Item number 3401/21 from the MOA: University of British Columbia.
This page shows all the information we have about this item. Both the institution that physically holds this item, and RRN members have contributed the knowledge on this page. You’re looking at the item record provided by the holding institution. If you scroll further down the page, you’ll see the information from RRN members, and can share your own knowledge too.
The RRN processes the information it receives from each institution to make it more readable and easier to search. If you’re doing in-depth research on this item, be sure to take a look at the Data Source tab to see the information exactly as it was provided by the institution.
These records are easy to share because each has a unique web address. You can copy and paste the location from your browser’s address bar into an email, word document, or chat message to share this item with others.
This information was automatically generated from data provided by MOA: University of British Columbia. It has been standardized to aid in finding and grouping information within the RRN. Accuracy and meaning should be verified from the Data Source tab.
Square ceramic tile painted white with dark green designs overtop. Surface and sides are glazed. Dark green border on all sides with white interlocking lines inside. Central design of a white 16-petal chrysathemum flower in a dark green circle, surrounded by two dark green circles. The dark green circle closer to the top edge has cherry blossom motifs, the circle closer to the bottom depicts the three-taloned lung dragon. Surrounding the circles are designs of leaves, vines and branches. Those designs are done with stippling. Five horizontal ridges on back of tile. Manufacturer’s mark, Mintons China Works, stamped in between ridges.
The tile shows Japanese influence, incorporating Japanese iconography, a trend that was popular in Victorian tiles at the time. The central flower is the Kiku-mon, a Japanese imperial badge of 16 petal chrysanthemum. The lower circle depicts the three-taloned lung dragon representative of a rain spirit. The third circle shows cherry blossoms, a Japanese national emblem. The background seems to depict plum branches.
Tile was manufactured by dust-pressing, a technique that uses clay milled to a fine powder with low moisture content, then pressed in a die at high pressure. The design was transfer-printed, a technique in which an image from an engraved plate is transferred to a tile, usually, requiring transfer paper to be run through a printing press with the engraved plate to pick up the ink, the design from the transfer paper could then be rubbed onto the tile.
Wall tile. Mintons China Works.
This data has been provided to the RRN by the MOA: University of British Columbia. We've used it to provide the information on the Data tab.
Square ceramic tile painted white with dark green designs overtop. Surface and sides are glazed. Dark green border on all sides with white interlocking lines inside. Central design of a white 16-petal chrysathemum flower in a dark green circle, surrounded by two dark green circles. The dark green circle closer to the top edge has cherry blossom motifs, the circle closer to the bottom depicts the three-taloned lung dragon. Surrounding the circles are designs of leaves, vines and branches. Those designs are done with stippling. Five horizontal ridges on back of tile. Manufacturer’s mark, Mintons China Works, stamped in between ridges.
The tile shows Japanese influence, incorporating Japanese iconography, a trend that was popular in Victorian tiles at the time. The central flower is the Kiku-mon, a Japanese imperial badge of 16 petal chrysanthemum. The lower circle depicts the three-taloned lung dragon representative of a rain spirit. The third circle shows cherry blossoms, a Japanese national emblem. The background seems to depict plum branches.
Tile was manufactured by dust-pressing, a technique that uses clay milled to a fine powder with low moisture content, then pressed in a die at high pressure. The design was transfer-printed, a technique in which an image from an engraved plate is transferred to a tile, usually, requiring transfer paper to be run through a printing press with the engraved plate to pick up the ink, the design from the transfer paper could then be rubbed onto the tile.
Wall tile. Mintons China Works.
Let the RRN community answer your questions
With an account, you can ask other users a question about this item. Request an Account
Share your knowlege of this item with the RRN community
With an account, you can submit information about this item and have it visible to all users and institutions on the RRN. Request an Account