Item Records

This page shows all the information we have about this item. Both the institution that physically holds this item, and RRN members have contributed the knowledge on this page. You’re looking at the item record provided by the holding institution. If you scroll further down the page, you’ll see the information from RRN members, and can share your own knowledge too.

The RRN processes the information it receives from each institution to make it more readable and easier to search. If you’re doing in-depth research on this item, be sure to take a look at the Data Source tab to see the information exactly as it was provided by the institution.

These records are easy to share because each has a unique web address. You can copy and paste the location from your browser’s address bar into an email, word document, or chat message to share this item with others.

  • Data
  • Data Source

This information was automatically generated from data provided by MOA: University of British Columbia. It has been standardized to aid in finding and grouping information within the RRN. Accuracy and meaning should be verified from the Data Source tab.

Description

Bentwood box, kerfs cut on both exterior and interior, fourth side pegged, now most pegs fallen away. Two shorter sides and one long side decorated each with panel of horizontal, finely chiseled grooves. Two smaller sides also have one vertical, rectangular area on right. These three panels are surrounded by border of vertical grooves. Remaining side is plain except for one vertical band of grooved diagonals down one edge. Base has split, leaving gap across width.

History Of Use

Bentwood container, a main storage unit on the Northwest Coast, varied in size, shape, and design depending upon the function each one served. Many boxes and chests had two-dimensional carved and/or painted designs of family crest figures, and by their display, stated family wealth and status. Those undecorated, or only slightly decorated with grooves as with this one, were often for everyday use.

Cultural Context

Utilitarian storage box.

Specific Techniques

Bentwood, or kerfed-corner, containers are constructed by a process unique to the Northwest Coast Aboriginal peoples. The carver begins with a single straight-grained plank of red cedar, or sometimes yellow cedar, spruce, or yew. The surface of the plank is finished with chisels, adzes, and knives; in earlier times, it was smoothed further with sandstone or dried sharkskin. Then three parallel kerfs, or grooves, are carved out at measured points across the width of the board, at right angles to the long edge. The kerfs, which will become three corners of the box, allow the board to be steamed until the wood fibres are softened, and then carefully bent to form a box with symmetrical sides. The final corner, as well as a fitted base, are joined and fastened with pegs (through drilled holes) or laced with spruce root or twisted cedar withes (branches). Storage boxes also have fitted lids of cedar, hollowed from the inside. Finally, painted compositions may be applied to the completed box and shallow carving added to bring the forms into relief. A well-made bentwood box is watertight. Historically, most boxes were used to store preserved foods and material goods; plain cooking boxes could be used to steam or boil food by adding water and heated stones.

Item History

With an account, you can ask other users a question about this item. Request an Account

With an account, you can submit information about this item and have it visible to all users and institutions on the RRN. Request an Account

Similar Items